Main Business: WORK AS INDEPENDENT AND PROFESSIONAL BROKER IN CHINESE WOOD INDUSTRY FOR SOURCING�BSPECIALIZED IN S4S SIBERIAN PINE,SIBERIAN PINE STAIR TREAD, SIBERIAN PINE FJ AND EG PANEL, S4S WHITE PINE, WHITE PINE FJ AND EG PANEL, WHITE BIRCH ROUGH LUMBER, WHITE BIRCH FJ AND EG PANEL, WHITE BIRCH FJ AND EG CUTTING BOARDS, WHITE BIRCH SOLID FLOORING, WHITE BIRCH AND MAPLE AND WHITE OAK STAIR PARTS,WHITE OAK MOULDING, WHITE OAK FJ AND EG PANELS, WHITE OAK SOLID FLOORING,POPLAR STRINGERS AND RISERS PRIMED, FIR AND POPLAR PRIMED PRODUCT�CLARCH CLEAR PRODUCT. S4S RUSSIAN PINE Note: Scientific Name For Russian Pine Is Pinus Sylvestris. 19mm x 89mm/140mm/185mm x 2450mm/3100mm/3700mm 4 FACE CLEAR (NORDIC A1)CLEAR ON ALL FOUR FACES There are no defects or discolorations of any kind or size allowed on all four sides 3FACE CLEAR (NORDIC A1) CLEAR ON 3 FACES There are no defects or discolorations of any kind or size allowed on all front face and two sides. Four small pin knots permitted on backside of board every eight feet (2450mm). Knots cannot exceed 20mm in diameter . RUSSIAN PINE STAIR TREAD Note: Scientific Name For Russian Pine Is Pinus Sylvestris. CARPET GRADE RUSSIAN PINE STAIR TREAD EDGE GLUED 26mm x293mm x 1220mm 26mm x293mm x 915mm 1�D2 knots per stave allowed or total of 8 knots per Tread. Maximum knot size 20-30mm with 2 knots allowed to be up to 35mm. A maximum of 30% of the treads may have 3 or less SPIKE KNOTS per tread of 50mm or less in length with maximum of 30mm width. 3% of the treads can have 1 or less SPIKE KNOT 70mm or less. 50% of the treads may have 5 or less PIN KNOTS of 5mm or less. These PIN KNOTS shall be in addition to the 8 knot total and the extra PIN KNOTS are allowed on 50% or less of the treads. 2�DAll knots shall be sound and tight. Knots can be alive or partially black dead knots. There cannot be any loose knots. Partially black dead knots are acceptable if they do not go through more than 25% of the thickness of the stave. Partially dead knots are black in color are tight and sound and cannot be pushed out with large force. Partially dead knots may be partially surrounded by a black ring but there cannot be any dead wood surrounding the knot or any space between the knot and the surrounding alive board. 3. Minimum Width of staves is 38mm and the maximum is 100mm per stave. The stave with the bullnose must be minimum of 50mm. The staves should be above four and can�ft exceed eight. 4. The wood grain of the Staves should be oriented in opposite directions. 5. Bullnose along one entire edge. 6. No wane, cupping, bowing or twisting permitted. 7. USE JAPANESE GLUE 3 FACES CLEAR RUSSIAN PINE STAIR TREAD EDGE GLUED 26mm x293mm x 1220mm 26mm x293mm x 915mm 1. No Knots or other defect permitted on top face, bull nose and back edge. Knots permitted on bottom face similar to carpet grade. 2. Minimum Width of staves is 38mm and the maximum is 100mm per stave. The stave with the bullnose must be minimum of 50mm. The staves should be above four and can�ft exceed eight. 3.The wood grain of the Staves should be oriented in opposite directions. 4.Bullnose along one entire edge. 5. No wane, cupping, bowing or twisting permitted. 6. USE JAPANESE GLUE 3 FACES CLEAR CHINESE ASH STAIR TREAD EDGE GLUED 26mm x293mm x 1220mm 26mm x293mm x 915mm 1. No Knots or other defect permitted on top face, bull nose and back edge. Knots permitted on bottom face similar to carpet grade. 2. Minimum Width of staves is 30mm and the maximum is 85mm per stave. The stave with the bullnose must be minimum of 50mm. 3.The wood grain of the Staves should be oriented in opposite directions. 4.Bullnose along one entire edge. 5. No wane, cupping, bowing or twisting permitted. 6. USE JAPANESE GLUE 7. MC : 6-10%. 3 FACES CLEAR WHITE OAK STAIR TREAD EDGE GLUED 26mm x293mm x 1220mm 26mm x293mm x 915mm 1. No Knots or other defect permitted on top face, bull nose and back edge. Knots permitted on bottom face similar to carpet grade. 2. Minimum Width of staves is 30mm and the maximum is 85mm per stave. The stave with the bullnose must be minimum of 50mm. 3.The wood grain of the Staves should be oriented in opposite directions. 4.Bullnose along one entire edge. 5. No wane, cupping, bowing or twisting permitted. 6. USE JAPANESE GLUE 7. MC : 6-10%. 3 FACES CLEAR MAPLE BIRCH STAIR TREAD EDGE GLUED 26mm x293mm x 1220mm 26mm x293mm x 915mm 1. No Knots or other defect permitted on top face, bull nose and back edge. Knots permitted on bottom face similar to carpet grade. 2. Minimum Width of staves is 30mm and the maximum is 85mm per stave. The stave with the bullnose must be minimum of 50mm. 3.The wood grain of the Staves should be oriented in opposite directions. 4.Bullnose along one entire edge. 5. No wane, cupping, bowing or twisting permitted. 6. USE JAPANESE GLUE 7. MC : 6-10%. 3 FACES CLEAR CANADIAN HEMLOCK STAIR TREAD EDGE GLUED 26mm x293mm x 1220mm 26mm x293mm x 915mm 1. No Knots or other defect permitted on top face, bull nose and back edge. Knots permitted on bottom face similar to carpet grade. 2. Minimum Width of staves is 30mm and the maximum is 85mm per stave. The stave with the bullnose must be minimum of 50mm. 3.The wood grain of the Staves should be oriented in opposite directions. 4.Bullnose along one entire edge. 5. No wane, cupping, bowing or twisting permitted. 6. USE JAPANESE GLUE 7. MC : 8-12%. CARPET GRADE CANADIAN HEMLOCK STAIR TREAD EDGE GLUED 26mm x293mm x 1220mm 26mm x293mm x 915mm 1. carpet grade. 2. Minimum Width of staves is 30mm and the maximum is 85mm per stave. The stave with the bullnose must be minimum of 50mm. 3.The wood grain of the Staves should be oriented in opposite directions. 4.Bullnose along one entire edge. 5. No wane, cupping, bowing or twisting permitted. 6. USE JAPANESE GLUE 7. MC : 8-12%. ASH ,LINDEN ,WHITE BIRCH ,MAPLE ,RUSSIAN ANGARA PINE CLEAR SOLID CROWN MOULDING Product Name: clear solid crown moulding Species : Chinese Ash, Chinese Linden, Chinese White Birch, Chinese Maple,Russian Angara Pine The Specification : 18.26mm X 57.15mm X 2438.40mm The Grade: clear grade CHINESE POPLAR STRINGERS AND RISERS PRIMED Note: Scientific Name For Chinese Poplar Is Populus Davidiana, Populus Canadensis, Populus Ussuriensis . Note: Can produce other primed product. 26MM X 235MM X 4900MM/5500MM/6100MM STRINGER 19MMX 197 MMX915MM/1220MM RISER CHINESE POPLAR STAIR STRINGERS AND RISERS TO BE TWO PRIME COATS WITH NO SURFACE DEFECTS OF ANY KIND. THE WOOD GRAIN ON THE STAVES SHOULD BE ORIENTED IN OPPOSITE DIRECTIONS TO IMPROVE STRENGHT OF STRINGER NO WANE, CUPPING, BOWING OR TWISTING PERMITTED USE JAPANESE GLUE CHINESE FIR PRIMED RISERS Note: Scientific Name Fo Chinese Fir Is Cunninghamia Lanceolata. Note: Can produce other primed product. 19MMX 197 MMX915MM/1220MM RISER CHINESE FIR STAIR RISERS TO BE TWO PRIME COATS WITH NO SURFACE DEFECTS OF ANY KIND THE WOOD GRAIN ON THE STAVES SHOULD BE ORIENTED IN OPPOSITE DIRECTIONS TO IMPROVE STRENGHT OF STRINGER NO WANE, CUPPING, BOWING OR TWISTING PERMITTED USE JAPANESE GLUE LARCH FLOORING UNFINISHED Thickness : 19mm Widths: 89mm 140mm Lengths : 1850mm 2450mm 3100mm 3700mm Grade: 3 FACES CLEAR

China Wood Materials International Services Inc.
Dalian Liaoning
China

Contact : Lee Mark For Further Information, ENTER YOUR EMAIL ADDRESS AND CLICK GO :